Description
Sharp 24″ x 14″ Vertical Machining Center with Fanuc Control, SV-2414 A-F
Inventory # 9044
Model: SV-2414 A-F
Specifications:
X-Axis Travel: 24″
Y-Axis Travel: 14″
Z-Axis Travel: 18″
Spindle Nose to Table: 2.8″ – 20.9″
Spindle Center to Column: 16.3″
Table Area: 27.6″ x 13.8″
Max. Workpiece Weight: 770 lbs.
T-Slot (Number x Width x Pitch): 5 x 0.63″ x 2.5
Spindle Taper: CAT-40
Spindle Speed: 8,000 RPM
Torque: 52′ /lbs. @ 1,500 RPM
Transmission: Belt Drive
ATC Type: Carousel Style
Tool Capacity: 16
Max. Tool Diameter: 3.7″
Without Adjacent Tool: 5.9″
Max. Tool Length: 11.8″
Max. Tool Weight: 15.4 lbs.
Tool Change Time (Tool to Tool): 6.8 Seconds
Tool Change Time (Chip to Chip): 8 Seconds
Method of Tool Selection: Set Tool Number
Rapid Traverse:
X/Y: 787.4 IPM
Z: 708.7 IPM
Cutting Feed Rate: 0.04 – 393.7″ / Min.
Transmission: Direct Drive
Positioning Accuracy: +/- 0.0003″
Repeatability Accuracy: +/- 0.0001″
Ball Screw Diameter, Pitch: 1.26″, 0.4″
X/Y/Z Servo Motors for Fanuc Control: 1.6 HP / 1.6 HP / 2.4 HP
Coolant Tank Capacity: 42 Gallons
Number of Coolant Nozzles: 8
Door Opening: 29.2″
Spindle Motor: 10 HP, 15 HP / 220v / 3ph
Standard Features:
Hardened and Ground Box Ways
Meehanite Cast Iron
No Table Overhang
Separate Roll Out Coolant Tank
Large Side Doors
Air Reservoir Tank
Automatic Lubrication System
Standard Accessories:
Box Way Construction
CNC Control: Fanuc 0i-MF
Spindle
Automatic Tool Changer
Coolant System
Auto-Lubrication System with Alarm
Coolant Gun
Air Gun
Pull-Out Style Chip Pan
Heat Exchanger for Electric Cabinet
Fluorescent Work Light
Air Reservoir Tank with Alarm
3-Tier Status Light
Full Metal Enclosure with 2 Large Side Doors
Tool Kit
Leveling Bolts and Pads
Mechanical Specifications:
Dimensions: 81″ x 76″ x 106″ H
Weight: approx. 5,500 lbs.
FOB Factory