Description
Whacheon 23″ x 79″ Lathe, HL-580
Inventory # 8265
Model: HL-580-2000
Made in Korea to Japanese Standards
Specifications:
Capacity:
Swing Over Bed: 22.83″
Swing Over Cross Slide: 14.17″
Swing Over Gap: 31.88″
Distance Between Centers: 78.74″
Spindle:
Spindle Nose: A1-8″ or D1-8″
Spindle Bore: 3.03″
Taper of Spindle Bore: M.T. #7
Taper of Center: M.T. #5
Number of Spindle Speeds: 12
Range of Spindle Speeds: 28 – 1,350 RPM
Carriage:
Number of Feed Changes: 40 Steps
Longitudinal Feed (Z-Axis): 0.0014″ ~ 0.0228″ /Rev.
Cross Feed (X-Axis): 0.0014″ ~ 0.0228″ /Rev.
Cross Slide Travel: 11.81″
Compound Rest Travel: 6.69″
Bite Holder Size: 1 1/4″ x 1 1/4″
Threads:
Lead Screw: 1.49″ x 0.23″
Inch Threads: 112 ~ 2 TPI
Metric Threads: 0.0098″ ~ 0.55″
D.P. Threads: 8 ~ 112
Module Threads: 0.25 ~ 3.5
Tail Stock:
Spindle Travel: 5.90″
Taper of Center: M.T. #5
Bed:
Width: 16.53″
Length: 126.18″
Motors:
Coolant Pump: 0.13 HP
Main Motor: 10.05 HP
Standard Features:
Number (12 steps) and range of speeds of this lathe is created so that the most suitable cutting speed may be given to any size of workpiece diameter within the possible range of cutting size, namely, within the range of swing over bed
The main spindle is supported at three points by precision bearings and its hole is generously sized
Automatic forced lubrication system supplies lubricant to every sliding way and driving mechanism inside the headstock
By lubricating device installed inside apron, automatic lubrication is provided between carriage slide ways and bedways
The feed mechanism permits positive shift from the normal feeds to the reverse, and vice versa, by simple operation of the lever on the front face of headstock housing or also the one at the apron
An adjustable carriage feed stop dog is provided on bed as well as a positive micrometer stop
The machine is equipped with an overload safety device for feeding and thread cutting
Taper-cutting attachment and rear tool-post are easily attached by means of carriage grooves of both sides
Cross feed screws always supply a proper quantity of grease more than one time per a week for maintaining smooth travel under maximum accuracy
Bed is designed to prevent torsion, side-wall is double wall and rib type
Hardened and ground bedways are made of high tensile cast iron. Produced under the license of UK Meehanite Know-How
Lower portions of bed casting are box-shaped and are full length, forming the legs, chip pan and coolant reservoir
The hydraulic disk brake provides safe quick braking of the spindle without generation of heat in the headstock
Diameter of tailstock shaft is 75mm and the overall length is hardened and ground. By loosening clamp lever, which keeps higher sliding efficiencies and better wear resistance of carriage
Standard Equipment:
Motor
Coolant Equipment
Driving Plate (11 3/4″)
Center Sleeve M.T. #7
Live Center M.T. #5
Dead Center (Cemented Carbide Tip) M.T. #5
Face Plate (Gap Type Only) (17 3/4″)
Steady Rest, 1 1/2″ – 6″
Carriage Micro Stopper
Thermal Relay
Change Gear 60T
Worm Gears (Metric System Only)
Installation Block
Tool Box
Grease Pump
Oil Gun
Box Handle
Hexagon Handle
Spanners
Screw Driver
Part List anad Manual
Mechanical Specifications:
Dimensions: 145.66″ x 45″ x 56.29″ H
Weight: approx. 7,200 lbs.
Contact us for special pricing and availability
FOB Factory