Advanced Search

Sharp 9" x 50" Vertical Milling Machine, LMV-50
Sharp 9" x 50" Vertical Milling Machine, LMV-50Sharp 9" x 50" Vertical Milling Machine, LMV-50Sharp 9" x 50" Vertical Milling Machine, LMV-50Sharp 9" x 50" Vertical Milling Machine, LMV-50Sharp 9" x 50" Vertical Milling Machine, LMV-50Sharp 9" x 50" Vertical Milling Machine, LMV-50Sharp 9" x 50" Vertical Milling Machine, LMV-50

Sharp 9″ x 50″ Vertical Milling Machine, LMV-50


Shipping: Add to Cart to Calculate

In stock

Make Offer

SKU: Lmv-50

Inventory #: 4484





Product Description

Sharp 9″ x 50″ Vertical Milling Machine

Inventory # 4484

Model: LMV-50



Working Surface: 9″ x 50″

T-Slots Number And Size: 3 Slots, 5/8″


Travels (X, Y and Z): 37″ x 12″ x 5″

Ram Travel: 12″

Knee Travel: 16″

Spindle To Column (Min. – Max.): 6 3/4″ – 18 1/2″

Spindle Nose To Table (Min. – Max.): 2 1/8″ – 18″


Spindle Motor: 3 HP / 220v, 440v / 3ph

Spindle Nose Taper: R8

Spindle Variable Speed Drive: 60 – 4,500 RPM

Quill Feed 3 Speed (IPR): .0015″, .003″, .006″

Head Swivels: 360°

Head Tilt (Left To Right): 45°

Head Tilt (Up and Down): 45°

Note: Optional Equipment Shown in Photos is Not Included in the Selling Price. (See Options List Below for Specifics)

Standard Equipment:

Hard-chrome ways and Gibbs

Precision ground and flaked table

Unique double nut backlash system

Double fan cooling system

3 HP head

Cutler hammer on/off switch

Front and rear way covers

One shot lube system

Features & Benefits:

ISO 9002 Certified: Quality up to world industry standards

Meehanite Casting: Highest grade of casting possible

A Pair of High Out-Put Fans: Keeps head and 3-hp motor cool, to run jobs for extended periods without damaging the motor, belts and bearing

A pair of precision ABEC-7 angular contact bearings to support spindle

The quill is ground and chromed to fit the housing: This insures a spindle run-out of .0002” P.O.R.

Motor shaft and vari-drive pulleys are dynamically balanced, then chromed for a flawless fit, ground ribs on inside diameter: For smooth speed changes

Motor shaft has an oil channel in the center that is fed by a grease fitting on the lower end: To keep vari-drive pulley moving smoothly on the shaft

This LMV-50 mill uses a roller bearing for the lower support of the shaft: It ensures proper loading, support and alignment it also prevents the shaft from being distorted by the tension of the belt for quiet, accurate operation at any speed for years and years

One shot lubrication system: For lubrication of ways and lead screws (X,Y, Z-Axis)

Hand scraped saddle and knee: For better oil retention. It avoids having chips and dirt embed in the knee and damage the sliding surface

Oil groove are milled: For maximum lubrication on all wear areas

Table and saddle backlash is controlled by double nut design: Keeps lead screw in contact with bronze nuts an all times to keep backlash at .0008” within 20”

Table and saddle are mounted with thrust bearings that are pre-loaded: Eliminating end-play for precisely controlled lateral movement

Patient knuckle design uses 6 bolt 3 per side, securing them from the outside: This method locks the head securely resulting in better accuracy and performance

Ways are hard chrome dovetail on saddle and column

Optional Accessories:

Fagor 20i 2-Axis Digital Readout

Servo X-Axis Power Table Feed

Servo Y-Axis Power Cross Feed, Installed

Servo Z-Axis Knee Feed, Installed

Maxi Torque Rite Power Draw Bar

Kurt D-675 Milling Vise

Mechanical Specifications:

Floor Area: 7’ Wide x 6.5’ Deep x 6.75’ H

Weight: 2,500 lbs.

Contact us for special pricing and availability

FOB Factory

Additional Information

Weight2500 lbs

Can't Find What You Need? Give Us a Call: 1-800-394-4399