Description
Sharp 14″ x 40″ Precision Lathe, 1440F
Inventory # 8641
Model: 1440F
Specifications:
Capacity:
Swing Over Bed: 14″
Swing Over Cross Slide: 8 5/8″
Swing Over Gap: 20″
Width of Bed: 8 1/2″
Width of Gap: 9 1/4″
Center Height from Top of Compound: 1 1/2″
Distance Between Centers: 40″
Headstock:
Spindle Nose Type: D1-4 Camlock
Spindle Bore: 1 1/2″
Spindle Speeds: 45 – 1,800 RPM
Threads and Feeds:
Longitudinal Feeds: 0.0012″ – 0.0294″ /rev.
Cross Feeds: 0.0003″ – 0.01″ /rev.
Inch Threads (40): 4 – 112 TPI
Metric Threads (22): 0.45 – 7.5mm
Leadscrew Pitch, Diameter: 8 TPI, 7/8″
Carriage:
Saddle Width: 13 1/4″
Apron Width: 11″
Cross Slide Width: 6 3/4″
Cross Slide Travel: 7″
Compound Rest Travel: 4″
Compound Width x Length: 3 1/2″ x 8 1/2″
Bed:
Bed Length: 66″
Bed Width: 8 1/8″
Tailstock:
Quill Travel: 4 1/2″
Quill Diameter: 1 3/4″
Quill Taper: MT # 3
Motor: 3 HP / 220v, 440v / 3ph
Standard Features:
D1-4 Camlock spindle, 1 1/2″ bore
Gap bed
Hardened and ground bedways
Larger compound, tailstock, and apron allow heavier cutting with less vibration than competitive models
16 speeds, all geared headstock housed inside a sturdy cast iron base
Jog button for eaasy gear engagement and inching spindle
Quick change gearbox offers a wide range of threads
Standard Equipment:
3-Jaw 8″ Chuck
Steady Rest
Coolant System
16 Speeds
Full Length Splash Guard
4-Way Tool Post
6″ Diameter Back Plate
Tailstock
Back Plate
Foot Break
Threading Dial
Center Sleeve (MT #5)
Dead Centers (MT #3)
Tool Kit (includes: machine manual, half nut wrench, wrench 17m, 19m, set of 6 allen wrenches, phillip screw driver, flat head screw driver, oil can, grease gun, rear way cover bracket, 2 set of dead center, pin for indicator, can of paint)
Mechanical Specifications:
Weight: approx. 1,650 lbs.
Contact us for special pricing and availability
FOB Factory