Advanced Search

Quality 30" x 22 Gauge Manual Slip Roll

PMI 36″ Automatic Non-Ferrous Cut-off Saw, PMI-NC36 L

Shipping: Add to Cart to Calculate

Make Offer


Inventory #: 7896

Categories: ,




Product Description

PMI 36″ Automatic Non-Ferrous Cut-off Saw, PMI-NC36 L

Inventory # 7896

Model: PMI-NC36 L


The PMI-NC36 L is designed for sawing aluminum and other non-ferrous metals. In addition to extrusion and tube, the saw’s powerful 20 HP motor allows it to cut solid bar quickly and accurately. One unique feature of PMI-NC36 L is the specially designed outfeed table that moves 2mm forward as well as backward after the cut is complete and the saw blade is retracting. This feature prevents scrates from occurring when the saw blade retracts back to its home position



Round: 12 1/2″

Square: 12 1/2″ x 12 1/2″

Rectangle: 6″ x 23″

Blade Size: 30″ or 36″

Stroke Length: 49.2″

Indexing Accuracy: .006″

Blade Speed: 500 – 3,000 RPM (Variable)

Motor: 20 HP

Standard Features:

Saw Blade Feed: The saw blade feed is driven by a hydraulic system for maximum stability of the saw blade during sawing operation. This is important when cutting solid or heavy walled extrusions/tubes. The saw blade travels horizontally through the material and is mounted on linear guide ways. The saw head travels on linear guide ways to assure accurate cutting on large materials. The feed rate is adjustable

20 HP Saw Motor: The powerful 20 HP saw motor allows for maximum cutting force and chip removal. This additional power extends the life of the saw blade between regrinds

Saw Blade Speed: The saw blade speed is infinitely variable on PMI-NC36 L machine. The speed can be adjusted from 500 RPM – 3,000 RPM in order to accommodate different material sizes, types, etc.

NC Control: The PMI-NC36 L is equipped with Mitsubishi NC controls. The NC cutting control manages your cut-off program, simply input via the touch screen your desired cut length, number of pieces, blade speed, etc. and the machine will monitor cut-off jobs for accuracy. 100 programs can be stored and each program can have 12 steps

Material Index System: The material is indexed to the cut length via a hydraulic gripper vise. The length gauge is set via a servo motor ball screw. The carriage vise is equipped with two horizontal and vertical clamps. The four point clamping system enables the saw to handle irregular shaped stock material without any additional fixtures. The saw is capable of reciprocating and stepping feed. The maximum single stroke length is 49.2″. For cut lengths over 49.2″, the saw will do multiple indexes

Clamping System: The pneumatic clamping system has adjustable clamping pressure to prevent distortion of thin wall profiles. As a standard feature, the saw has vertical and horizontal clamps. The carriage vise has two vertical and two horizontal clamps, so it is capable of clamping irregular shaped pieces of material. The fixed vise has two vertical and one horizontal clamp to ensure the part is clamped securely during cutting operation. The clamps can be adjusted base on size of the material. With its extensive clamping system, PMI-NC36 L is able to cut multiple pieces at one time

Special Design Retractable Work Table: When PMI-NC36 L has completed cutting a work piece, the saw work table on the infeed and outfeed side of the saw blade moves 2mm backward (infeed) and 2mm forward (outfeed) as the saw blade retracts to its home position. This design allows for an accurate and smoother finish on cut parts because it prevents the saw blade from scratching/re-cutting the part as it retracts to its home position

Precise Micro-Drip Lubrication System: The blade is lubricated via a micro-drip system. A small amount of lubricant is introduced to an air line at point of discharge for control and economical distribution of the saw lubricant

Safety Machine Enclosure: The PMI-NC36L is guarded via a machine enclosure that is monitored by limit switches. The machine cover must be closed for the saw to cycle

Safety Limit Switch: The saw blade access door is protected via a limit switch that shuts down the machine in case the door is opened while the saw is in operation. The saw blade will NOT cycle with this door open

Standard Equipment:

Chip Collector

11 1/2′ Infeed Conveyor

120T Saw Blade

Operators Manual

Tool Kit

Mechanical Specifications:

Dimensions: 161″ x 96″ x 84″ H

Weight: approx. 8,000 lbs.

Contact us for special pricing and availability

FOB Factory

Additional Information

Weight8500 lbs

Can't Find What You Need? Give Us a Call: 1-800-394-4399