Description
PMI 30″ Automatic Non-Ferrous Cut-off Saw, PMI-NC30 L
Inventory # 7895
Model: PMI-NC30 L
Description:
The PMI-NC30 L is designed for sawing aluminum and other non-ferrous metals. In addition, to extrusion and tube, the saw’s powerful 20 HP motor allows it to cut solid bar quickly and accurately. One unique feature of PMI-NC30 L is the specially designed outfeed table that moves 2mm forward as well as backward after the cut is complete and the saw blade is retracting. This feature prevents scratches from occurring when the saw blade retracts back to its home position
Specifications:
Capacity:
Round: 10″
Square: 10″ x 10″
Rectangle: 9 3/4″ x 19.70″
Blade Size: 30″
Stroke Length: 55″
Indexing Accuracy: .004″
Blade Speed: 1,500 – 3,500 RPM (Variable)
Motor: 20 HP
Standard Features:
Saw Blade Feed: The saw blade feed is driven by a hydraulic system for maximum stability of the saw blade during sawing operation. This is important when cutting solid or heavy walled extrusions/tubes. The saw blade travels horizontally through the material and is mounted on linear guide ways. The saw head travels on linear guide ways to assure cutting on large materials. The feed rate is adjustable
20 HP Saw Motor: The powerful 20 HP saw motor allows for maximum cutting force and chip removal. This additional power extends the life of the saw blade between regrinds
Saw Blade Speed: The saw blade speed is infinitely variable on PMI-NC30 L machine. The speed can be adjusted from 1,500 RPM – 3,500 RPM in order to accommodate different material sizes, types, etc.
NC Control: The PMI-NC30 L is equipped with Mitsubishi NC controls. The NC cutting controls manages your cut-off program, simply input via the touch screen your desired cut length, number of pieces, blade speed, etc. and the machine will monitor cut-off jobs for accuracy. 100 programs can be stored and each program can have 12 steps
Material Index System: The material is indexed to the cut length via a hydraulic gripper via. The length gauge is set via a servo motor ball screw. The carriage vise is equipped with two horizontal and vertical clamps. The four point clamping system enables the saw to handle irregular shaped stock material without any additional fixtures. The saw is capable of reciprocating and stepping feed. The maximum single stroke length is 55″. For cut lengths over 55″, the saw will do multiple indexes
Clamping System: The pneumatic clamping system has adjustable clamping pressure to prevent distortion of thin wall profiles. As a standard feature, the saw has vertical and horizontal clamps. The carriage vise has two vertical and two horizontal clamps, so it is capable of clamping irregular shaped pieces of material. The fixed vise has two vertical and one horizontal clamp to ensure the part is clamped securely during cutting operation. The clamps can be adjusted based on size of the material. With its extensive clamping system, PMI-NC30 L is able to cut multiple pieces at one time
Special Design Retractable Work Table: When PMI-NC30 L has completed cutting a work piece, the saw work table on the infeed and outfeed side of the saw blade moves 2mm backward (infeed) and 2mm forward (outfeed) as the saw blade retracts to its home position. This design allows for an accurate and smoother finish on cut parts because it prevents the saw blade from scratching/re-cutting the part as it retracts to its home position
Precise Micro-Drip Blade Lubrication System: The blade is lubricated bia a micro-drip system. A small amount of lubricant is introduced to an air line at point of discharge for control and economical distribution of the saw lubricant
Safety Machine Enclosure: The PMI-NC30 L is guarded via a machine enclosure that is monitored by limit switches. The machine cover must be closed for the saw to cycle
Safety Limit Switch: The saw blade access door is protected via a limit switch that shuts down the machine in case the door is opened while the saw is in operation. The saw blade will NOT cycle with this door open
Standard Equipment:
Chip Collector
11 1/2′ Infeed Conveyor
120T Saw Blade
Operators Manual
Tool Kit
Mechanical Specifications:
Dimensions: 138″ x 82.67″ x 73.23″ H
Weight: approx. 6,400 lbs.
Contact us for special pricing and availability
FOB Factory