Description
Republic Lagun 58″ x 11″ Vertical Milling Machine, MVM-4
Inventory # 6642
Model: MVM-4
Specifications:
Table Size: 58″ x 11″
T-Slots: (3) 2 1/2″ Centers
T-Slot Size: 5/8″
Max. Weight on Table: 1,200 lbs.
Table Travel, X-Axis: 39.37″
Cross Travel, Y-Axis: 15.35″
Knee Travel: 15 3/4″
Ram Travel: 20″
Ram Swivels: 360°
Speed: 60 – 4,300 RPM (Variable)
Low Range: 60 – 500 RPM
High Range: 500 – 4,300 RPM
Head Swivel: +/- 45°
Distance, Spindle to Column: 5 1/2″ – 25.6″
Power Quill Feed, Reverse: .0015″, .003″, .006″
Spindle Taoer: # 40 NST
Quill Diameter: 4.13″
Quill Travel: 5″
Column Turret Diameter: 14.96″
Knee Width: 15.34″
Knee to Column Bearing Length: 34.84″
Saddle and Table Bearing Length: 40″
Ram and Turret Bearing Length: 18.90″
Ram Total: 40.63″
Motor: 5 HP / 230v / 3ph
Standard Features:
The quill is hard chromed with precision ground rack
High precision ball screw on X and Y-Axis
A unique double nut assembly provides backlash adjustment of longitudinal and cross feed screws. Adjustment of this device eliminates backlash due to wear
The 15.35″ wide knee has square way quides. This combination provides excellent rigidity. Ways are hardened and ground
The extra-long saddle has a full 40″ of bearing length supporting the table, allowing work-piece weights up to 750 lbs.
The automatic lubrication system provides oil to all sliding surfaces, nuts and lead screws
Anti-friction turcite type bearings surface material is used through out the machine
Push buttons conveniently located at controls station; provides spindle on/off, coolant on/off, and an emergency stop
Variable servo power feed, longitudinal and cross axis. Single speed for vertical axis
Power rapid traverse; all three directions
Adjustable overload safety clutch and table stops
Manual table traverse hand wheel for easy reach from the operators front position
NEMA type column mounted electrics
Base chip pan
A flood coolant system pump is located on top of base inside the column. The base acts as a reservoir. Access is thorugh the column opening
Standard Equipment:
X and Y-Axis Hi-Precision Ball Screws
Flood Coolant System
Hardened and Precision Ground Ways
Auto Lubrication System
Operators Manual/Parts List
Power Knee; Built-In Variable Speeds and Feeds for X and Y
Draw Bar
Basic Service Tool Kit
220 Volt Nema Type Column Mounted Electric Box with Emergency Stop and Disconnect Switch
Step Down Transformer 110 Volt to Push Buttons
Rubber Chip Cover in Front and Rear
Mechanical Specifications:
Floor Space: 77.55″ x 93.7″ H
Weight: approx. 3,938 lbs.
FOB Factory – Contact us for Pricing and Availability