Description
Amada Marvel 18″ x 22″ Vertical Tilting Band Saw with Power Tilting Head Option, Series 8 Mark III
Inventory # 2338
Model: Series 8 Mark III
Specifications:
Capacity:
@ 90°:
Horizontal: 18″
Vertical: 22″
@ 45°(Right):
Horizontal: 18″
Vertical: 14.5″
@ 45° (Left):
Horizontal: 18″
Vertical: 13″
@ 60° (Right):
Horizontal: 18″
Vertical: 9.7″
@ 60° (Left):
Horizontal: 18″
Vertical: 7.3″
Column in 3° Forward Cant Position:
Horizontal: 17 1/2″
Vertical: 22″
T-Slotted Work Table:
Work Area: 24 1/4″ x 33″
Table Height: 38″
Speed Range: 50 – 450 FPM (Variable with Inverter Drive)
Feed Range: 0 – 250 lbs.
Wheel Diameter: 19″
Quick-Action Vise: 12″ x 18″ x 6″
Blade: 15′ 4″ x 1 1/4″ x .042″
Blade Tension: 40,000 PSI
Motor: 5 HP / 208v, 240v, 480v / 3ph (Please Specify Desired Voltage at Time of Order)
Standard Features:
Front mounted speed control allows blade speed to be adjusted from operator’s control station
Feed range in infinitely variable with control on operator’s panel and automatic column return
Column feed is mechanical with Marvel clutch power feed
One manual vise
Two machined t-slots
Cast iron wheels
Blade break/stall detection shuts off machine in the event of blade breaking or stalling
For miter cutting, column and blade tilt up to 60° right and left of vertical; work always stationary
Electric power tilt
Marvel patent pending quick change column is standard and allows column to be set either upright or at a 3° forward cant
Column travels on recirculating linear ball bearing rails
Adjustable stops can be pre-set to stop advance and return of blade and also stop motor at any location within the 18″ travel of the blade
Coolant system is built in with flood system and is controlled by an on/off selector switch at the opertor’s station
A flushing hose washes chips from hard to get places reducing your clean-up time
Power chip brush together with blade wipers and flood coolant keep blade teeth free of chips
Solid carbide post design equipped with patent pending Marvel easy load guide blocks. Upper and lower guides have preloaded carbide faced back-up blocks to support back edge of blade
IEC fused disconnect switch and magnetic motor starters with overload and low-voltage protection
Disconnect is NFPA79 compliant
DC power supply provides low voltage control to all push buttons at operator’s control panel and machine lighting circuits
PLC control and components mounted in moisture proof NEMA 12 compartment
Electrical panel is UL labeled
Mechanical Specifications:
Dimensions: 102″ x 72″ x 90″
Weight: approx. 3,000 lbs.
FOB Factory – Contact us for Availability