Description
Clausing Colchester 13″ Geared Head Lathe, 8027J
Inventory # 4481
Model: 8027J
Description:
Clausing Colchester geared head engine lathes are the industry standard for conventional lathes because the quality built into every machine translates into real long-term performance in your application. Rugged construction, consistent quality in design and production and the “human engineering” which makes the operator more efficient, all make this lathe a cost-effective investment
Specifications:
Capacity:
Height of Center: 6 1/2″
Depth of Center: 40″
Swing over Bed: 13″
Swing in Gap: 18.8″
Width in Front of Faceplate: 4 1/2″
Swing over Cross Slide: 8.26″
Bedway Width: 12 1/2″
Headstock:
Spindle Bore: 1 1/2″
Spindle Nose: D1-4
Spindle Nose Taper: 3 M.T.
Spindle Speeds: 40 – 2,500 RPM (12 Steps)
Cross/Top Slide:
Travel Cross Slide: 7 1/2″
Width of Cross Slide: 5 1/2″
Travel of Top Slide: 3.63″
Width of Top Slide: 3 1/4″
Tailstock:
Quill Travel: 4.38″
Quill Diameter: 1.63″
Quill Taper: 3 M.T.
Feeds and Threading:
Longitudinal Feed Range: 0.001″ – 0.039″ /rev.
Number of Inch Pitches: 35
Range of Inch Pitches: 2 – 56 TPI
Number of Metric Pitches: 39
Range of Metric Pitches: 0.2mm – 14mm
Number of Diametral Pitches: 18
Range of Diametral Pitches: 8 – 56 DP
Number of Module Pitches: 18
Range of Module Pitches: 0.3 – 3.5 MOD
Spindle Motor: 3 HP
Standard Features:
Fully-geared headstock with 12 spindle speeds
All headstock gears are hardened and ground
Headstock shafts are splined and turn on anti-friction bearings
Spindle bearings, gears and shafts are lubricated by a forced lubrication system
A broad range of feed and thread selections are available by using three selector levers and 8-position rotary dial
Precision Gamet spindle bearings
Cross slide runs along a dovetail guide
Bed wipers and an apron mounted one-shot lubrication pump
The cast iron apron is totally enclosed and splash bath lubricated
Gap bed with easy-to-remove bed blocks
40″ center distances
Equipped with chuck guard, full splash guard and leadscrew cover
Clutch drive, reverse leadscrew with spindle turning for faster thread cutting
Extra wide bed provides accuracy and minimal wear
A one year warranty and backed by the Clausing Service Center dedicated to support their customers with parts and service
Mechanical Specifications:
Dimensions: 82″ x 37″ x 58″ H
Weight: approx. 1,960 lbs.
Contact us for special pricing and availability
FOB Factory