Description
Koike Aronson Compact Welding Carriage for Semi-Automated Welding, Wel-Handy NEXT
Inventory # 8692
Model: Wel-Handy NEXT
P/N: 20503814
Description:
Revolutionary new drive system. Compatible with all NEXT series machines
A high performance type of welding carridge that is equipped with a powerful driving engine and is available with diversifying application of welding carridge. Due to the newly developed gearbox, the durability of the series best driving system has been secured
Specifications:
Magnet Type: Neodymium rare earth magnet applies up to 120 lbs of adhesion strength depending on saturation. 1/4″ plate minimum, 110 lbs.
Driving System: Four wheel drive rubber tires, motor encoder with planetary gearbox
Traction: 4-wheel drive, solid rubber tires
Ground Clearance: 7/32″
Magnet Engagement: Side mounted mechanical lift off actuation
Travel Speed: 2 – 60″/Min.
Arc Stablization Time: 0 – 10.0 Sec.
Guide Type: Mechanical force utilizing brass guide wheels
Types of Welds: Fillet, V-Groove, Overhead, Out of Position, Submerged Arc, Dual Torch
Welding Interface: Utilizes power cord to send input signal to welder automatically
Limit Switch: Allows for automatic stop and jog to position
Arc Test: Momentary switch – ensures machine connectivity
Crater Fill with Back-Step: Programmable time, distance, and speed to ensure adequate weld size
Stitch: Momentary, On/Off set by distance
Input Power Supply: 240v / 1ph
(Optional) Weaving:
Weaving Speed: 15.7 – 59″/Min.
Weaving Width: 0 – 3.9″
Stop Time on Left, Middle, and Right: 0 – 10
Standard Features:
Multi-position guide rollers ensures proper alignment with work piece
Performs straight line, stitch, and weave type welds with the same carriage
Strong enough for overhead applications
Built-in interface to welder. Does not require additional cabling for weaver
Machine will pause and perform a back step while welding. Ensures exact wire deposition throughout the weld
Enhanced limit switch features. Stops the machine at the end of each weld but doubles as a job to position with a single press of the switch
Encoder drive motor and control
Multiple torch mounting and configurations
Optional weaving unit (plug and play)
Mechanical Specifications:
Dimensions: 11″ x 11″ x 9.8″ H
Weight: approx. 19.4 lbs.
FOB Factory