Sharp 43″ x 23″ High Precision Compact Vertical Machining Center, SV-4323
Inventory # 4383
The Sharp SV-4323 Series of Vertical Machining Centers are engineered to have unsurpassed quality and outperform all other machines in its category. This is an extremely rigid “C” frame design using hardened and ground box ways. All structural components are made of meehanite casting with internal ribs running throughout each section. Precision hand scraping of each section provides near perfect alignment assuring long term accuracy
Spindle choices include a 20 HP, 8,000 RPM CAT 40 for the SV-4323
The SV-4323S offers a 25 HP, 10,000 RPM CAT 40 Spindle
The new Fanuc Oi-MD control with color LCD is used along with all Fanuc motors and drives. For operator convenience, a remote jog handle is standard
X-Axis Travel: 43.3″
Y-Axis Travel: 23.6″
Z-Axis Travel: 22″
Spindle Nose to Table: 3.9″ – 26″
Spindle Center to Column: 34.4″
Table Area: 51.2″ x 23.6″
Floor to Table: 35.2″
Max. Workpiece Weight: 2,425 lbs.
T-Slot (Number x Width x Pitch): 6″ x 0.7″ x 3.9″
Spindle Taper: CAT-40
Spindle Speed: 8,000 RPM
Spindle Torque: 52′ /lb @ 1,500 RPM
ATC Type: Arm Type
Tool Capacity: 24
Max. Tool Diameter: 3.74″
with Adjacent Tool: 7.3″
Max. Tool Length: 11.8″
Max. Tool Weight: 15.4 lbs.
Tool Change Time (Tool to Tool): 3 Sec.
Tool Change Time (Chip to Chip): 5 Sec.
Rapid Traverse: X/Y – 787″ per Minute, Z – 590″ per Minute
Cutting Feed Rate: 0.04″ – 393.7″ per Minute
Transmission Direct Drive
Ball Screw Diameter/Pitch: 1.8″ / 0.4″
Feed Motor: X/Y – 8.9′ /lb. Z – 22′ /lb.
Max. Thrust: X/Y – 3,909 lbs. Z – 9,773 lbs.
Positioning Accuracy: +/- 0.0002″
Repeatability Accuracy: +/- 0.0001″
Motor: 15 HP / 220v / 3ph
Hardened and ground box ways on all axes
Double anchored, pretensioned, double nut ball screws
Auto-lubrication system with alarm
Halogen work light
Air reservoir tank with alarm
3 tier status light
Heat exchanger for electrical cabinet
Leveling bolts and pads
Fanuc control and operators manuals
One year parts and labor warranty from Sharp
Two years parts and labor Fanuc control and motor warranty from Sharp
Dimensions – without Chip Conveyor: 115″ x 86″ x 110″ H
Weight: approx. 16,315 lbs.
Contact us for special pricing and availability