Description
Amada Marvel 31 1/4″ x 37 1/2″ Vertical Tilt Frame Band Saw, VT7995S (Formerly 800APCS)
Inventory # 7792
Model: VT7995S
Made in USA
Specifications:
Capacity:
Nominal:
Rectangular: 31 1/4″ x 37 1/2″
Round: 31 1/4″
@ 45° Right:
Rectangular: 31 1/4″ x 25 1/2″
Round: 25 1/2″
@ 60° Right:
Rectangular: 31 1/4″ x 17 1/2″
Round: 17 1/2″
@ 45° Left:
Rectangular: 31 1/4″ x 24 3/4″
Round: 24 3/4″
@ 60° Left:
Rectangular: 31 1/4″ x 16″
Round: 16″
Speed Range: 60 – 400 FPM
Feed Force: 0 – 350 lbs.
Blade Size: 300″ x 2″ x .063″
Blade Guides: Combination Roller Bearing / Carbide
Blade Tension: 32,000 PSI
Auto Bar Feed: 72″ Servo Driven
Hydraulic Pump: 5 HP
Hydraulic Tank: 10 Gallons
Motor: 15 HP
Standard Features:
Blade Drive: Electric with sensorless vector control for smooth acceleration and full torque
Tilting Column: For miter cutting up to 60° left and right of vertical. Variable speed, inverter driven, electronic tilt – includes encoder feedback and touch screen display & control, for precision miter positioning. Electrically powered, chain driven, with encoder feedback and Marvel PC3 controller
3° Canted Column or Non-Canted Column: Standard 3° forward approach angle for increased efficiency in cutting of structural materials
Feed Force: Direct Force Sensing Electric Ball Screw Feed 0 – 350 lbs; column travels on recirculating linear ball ways. Feed pressure can be automatically set when material is selected
Blade: One Welded-Edge Band is furnished with each machine as part of standard start-up supplies
Blade Guides: Rotating Easy Load Combination Carbide and Ball Bearing Roller guides with self tensioning design
Blade Tension: Hydraulically controlled, 32,000 PSI maximum. Machine equipped with automatic blade break/blade stall shut off switch
Upper Blade Guide Arm: Hydraulically positioned and locking, controlled by selector switch at operator’s station
Vises: Hydraulic, full stroking with 12″ x 20″, 60° face plates. Optional variable vise pressure available. An optional second machine vise is available
Coolant System: Built-in with flood system, available with Drop Lubrication system (requires compressed air connection), including chip pan with manual hand crank type chip conveyor. A flushing hose is included to wash away chips from hard to reach places reducing clean up time
Work-Rest Rollers: Two turned ball bearing rollers, one on the entry side and one on the discharge side of the machine bed
Automatic Bar Feed: The Automatic Bar Feed design features a 72″ stroke length with indexing speeds of up to 32 ft./min. The bar feed vise is servo driven with encoder feedback, and combines precision double ball screws with preloaded recirculating linear guides, resulting in positioning accuracy of +/- .005″ per index. The vise itself is hydraulically clamped to prevent material slippage
Marvel PC3 Programmable Control: Provides a Programmable Logic Control with a 12″ color, touch screen display. The control features graphical part programming with memory for up to 500 jobs and parts, as well as a material selection chart and customizable material library. Both blade speed and feed force are automatically set according to material type for optimal cutting performance. Job programming consists of setting the cut-off length, angle and number of pieces to be cut. Additional features include inch/metric capability, out-of-stock shut down device, a fast cut job option and expanded memory storage using removable media. Also includes Jammed Blade Protection that senses resistance as the column returns and stops to prevent blade damage. Material can also be fed through the machine manually in both directions using the hydraulic shuttle vise. Blade can be stopped with all other power functions operative
Standard Left-to-Right Work Entry: Opposite hand or right-to-left work entry available
Controls: IEC fused disconnect switch and magnetic motor starters with overload and low-voltage protection. Power supply provides low voltage control to all push buttons at operator’s control panel and machine lighting circuits. PLC control and drives mounted in moisture tight compartment with vibration isolation mountings. Electrical equipment conforms to National Electrical Code NFPA 79. The Electrical Control Panel is U.L Labeled.
Contact us for special pricing and availability
FOB Factory