We are searching our extensive inventory for your item.

Amada Marvel 31 1/4″ x 37 1/2″ Manual Vertical Tilt Frame Band Saw, VT7995M (Formerly 800M)

Shipping: Add to Cart to Calculate

SKU: VT7995M (Formerly 800M)

Inventory #: 7793

Categories: , ,

Condition:

Type:

Brands: ,

Description

Amada Marvel 31 1/4″ x 37 1/2″ Manual Vertical Tilt Frame Band Saw, VT7995M (Formerly 800M)

Inventory # 7793

Model: VT7995M

Made in USA

Specifications:

Capacity:

Nominal:

Rectangular: 31 1/4″ x 37 1/2″

Round: 31 1/4″

@ 45° Right:

Rectangular: 31 1/4″ x 25 1/2″

Round: 25 1/2″

@ 60° Right:

Rectangular: 31 1/4″ x 17 1/2″

Round: 17 1/2″

@ 45° Left:

Rectangular: 31 1/4″ x 24 3/4″

Round: 24 3/4″

@ 60° Left:

Rectangular: 31 1/4″ x 16″

Round: 16″

Speed Range: 60 – 400 FPM

Feed Force: 0 – 350 lbs.

Table Height: 52″

Blade Size: 300″ x 2″ x .063″

Blade Guides: Combination Roller Bearing / Carbide

Blade Tension: 32,000 PSI

Auto Bar Feed: 72″ Servo Driven

Hydraulic Pump: 5 HP

Hydraulic Tank: 10 Gallons

Motor: 15 HP

Standard Features:

Blade Drive: Electric with sensor-less vector control for smooth acceleration and full torque

Tilting Column: For miter cutting up to 60° left and right of vertical. Variable speed, inverter driven, electronic tilt – includes encoder feedback and touch screen display and control, for precision miter positioning. Electrically powered, chain driven, with encoder feedback and Marvel PC3 controller

Touch Screen Control: Blade speed, feed pressure and angles are selected using the convenient, operator friendly touch screen control

3° Canted Column or Non-Canted Column: Standard 3° forward approach angle for increased efficiency in cutting of structural materials

Feed Force: Direct Force Sensing Electric Ball Screw Feed 0 – 350 lbs; column travels on recirculating linear ball ways. Feed pressure can be automatically set when material is selected

Jammed Blade Protection: Automatically senses resistance as the column returns and stops to prevent blade damage

Blade: One Welded-Edge Band is furnished with each machine as part of standard start-up supplies

Blade Guides: Rotating Easy Load Combination Carbide and Ball Bearing Roller guides with self tensioning design

Blade Tension: Hydraulically controlled, 32,000 PSI maximum. Machine equipped automatic blade break/blade stall shut-off switch

Upper Blade Guide Arm: Hydraulically positioned and locking, controlled by selector button on the touch screen

Vises: Hydraulic, full stroking with 12″ x 20″, 60° face plates. Optional variable vise pressure available as well as an optional second machine vise

Coolant System: Built-in with Flood system, available with Drop Lubrication system, includes chip pan with manual hand crank type chip conveyor. A flushing hose is included to wash away chips from hard to reach places reducing clean-up time

Work-Rest Rollers: Two turned ball bearing rollers, one on each side of the machine bed

Standard Left-to-Right Work Entry: Opposite Hand or Right-to-Left work entry available

Controls: IEC fuses disconnect switch and magnetic motor starters with overload and low-voltage protection. Power supply provides low voltage control to all push buttons at operator’s control panel and machine lighting circuits. PLC control and drives mounted in moisture tight compartment with vibration isolation mountings. Electrical Equipment conforms to National Electrical Code NFPA 79. The Electrical Control Panel is U.L. Labeled

FOB Factory – Contact us for Pricing and Availability

Additional information

Weight 8000 lbs

Can't Find What You Need? Give Us a Call: 1-800-394-4399