Description
HARDINGE TAILSTOCK for DSM-59 & DV-59 LATHES
INVENTORY # 2584
FOR MODEL DSM-59 & DV-59 LATHES
DESCRIPTION
HARDINGE TAILSTOCK ASSEMBLY FOR DV59 LATHES:
A TAILSTOCK IS USED TO SUPPORT LONG WORK PIECES, SUPPORT WORK FOR MACHINING BETWEEN CENTERS, OR HOLD TOOLS TO PERFORM MACHINING.
THE TAILSTOCK SPINDLE IS HARDENED AND GROUND AND HAS A NUMBER 2 MORSE TAPER ID.
THE SPINDLE OD IS GRADUATED IN 1/8 INCH INCREMENTS.
THE SPINDLE CAN BE LOCKED IN ANY TRAVEL POSITION USING A LEVER THAT OPERATES TO LARGE HALF NUTS TO HOLD THE SPINDLE SECURE.
SPINDLE MOVEMENT IS CONTROLLED USING A HANDWHEEL WHICH HAS A LARGE, ADJUSTABLE EASILY READ DIAL THAT IS GRADUATED IN .001 INCREMENTS.
THE BALL BEARING IN THE HANDWHEEL PROVIDES FOR ABSORPTION OF TOOL THRUST AND FOR A FINE FEEL WHEN PERFORMING PRECISION WORK.
THE TAILSTOCK ASSEMBLY USES A LEVER OPERATED CLAMP BOLT TO LOCK THE TAILSTOCK TO THE DESIRED POSITION ON A MACHINE DOVETAIL BEDPLATE.
TOOLS ARE LOCKED INTO PLACE IN THE TAILSTOCK DUE TO THE MATCHING NUMBER 2 MORSE TAPERS OF BOTH THE TOOL AND THE TAILSTOCK.
TOOLING IS AUTOMATICALLY DISCHARGED WHEN THE TAILSTOCK SPINDLE IS COMPLETELY RETRACTED INTO THE CASTING AND IT HITS A HARDENED POSITION STOP.
GOOD CONDITION
NEW REPLACEMENT COST: $ 3,700.00
PRICE: $ 950.00
FOB OUR BALTIMORE, MD WAREHOUSE