Advanced Search

Quality 30" x 22 Gauge Manual Slip Roll

Atek-Bantam 2′ x 42 Ton Pneumatic Press Brake, PM242



Make Offer

SKU: PM242

Inventory #: 7506

Categories: ,




Product Description

Atek-Bantam 2′ x 42 Ton Pneumatic Press Brake, PM242

Inventory # 7506

Model: PM242

Made in USA


Tonnage: 42 Tons @ 100 PSI

Bed & Ram: 32″ W x 14 1/2″ H

Ram Stroke: 0 – 2″

Bed Adjustment: 0 – 3″

Window: 6″ Deep x 9 3/4″ H

Distance Between Housings: 24 1/4″

Tooling Space: 9 1/2″

Back Gauge Depth: 0-19″ Between Housings, 21″ Between Cylinders

Full Stroke Free Air: 4.4 CFS

Max. Speed: 20 SPM

Included Tooling: Steel 90º Top Punch & 3/4″ vee die


Full frame design: No floor stand required.

Select the Optimal Speed: Ram speed control via an infinitely variable valve allows instant adjustment of air flow to the dual cylinders. A minimum setting creates a creep mode for setup, or select any other position to safely match ram speed with your job.

Positive Ram Stop: Adjustable stroke depth control is provided by the screw stop for precise repeatability. Raise the adjustable bed and shorten the ram stroke to maximize productivity while reducing air consumption and minimizing the pinch point for safer operation.

Accommodate a Wide Variety of Tooling: Adjustable die space handles numerous tool sets and reduces or eliminates the pinch point. Per OSHA guidelines, a die space gap of 1/4″ or less is not a pinch point and provides the safest operation method. Loosen the bed and raise or lower it with the large bed elevating screws. Leveling of bed to ram is easily accomplished using this feature.

Give the Operator Full Command: Safety hooded foot pedal controls all ram motion. Fully depress control pedal for down stroke. Slightly release pedal stop advancing the ram. Completely release pedal at any time and the counter-balanced ram automatically retracts to the top of the stroke. For added safety, the ram retracts if air supply is removed.

Condition the Air Supply: Modular FRL unit is standard on all models to condition air supply to pneumatic components for long life. The unit consists of an adjustable filter/regulator module with pressure gauge, adjustable flow lubricator module and a three-way lockable shut-off valve. The valve is vented to relieve downstream pressure in the off position per OSHA guidelines. Keyed padlock and lockout tag are included.

Select the Right Tonnage for the Job: Variable tonnage control provided through the modular filter/regulator/lubricator unit delivers 12 or 24 tons of ram force to form up to 3/8″ or 1/2″ at maximum pressure. Lower the pressure to suit the job, reduce air consumption and preserve tooling.

Run without Interruption: Our fully pneumatic press brakes require minimal service. Designed for simplicity, there are few moving parts to wear out – no motor, clutch or brake to maintain or replace.

Details that Count: Every Atek-Bantam is designed and built with quality and attention to details. Ram guides are simple to adjust and provide years of service. All critical pivot points are heat treated and equipped with grease fittings. Special bushing material is engineered for high loads to support the rocking lever pivot shaft.

Mechanical Specifications:

Dimensions: 38″ W x 38″ Deep x 61″ H

Overall Weight: approx. 2,825 lbs.

Contact us for optional accessories and tooling

FOB Factory

Additional Information

Weight2825 lbs

Can't Find What You Need? Give Us a Call: 1-800-394-4399