We are searching our extensive inventory for your item.
Amada Marvel 20″ x 25″ Vertical Tilting Band Saw with Programmable Control and Servo Shuttle, VT5063S (Formerly 2125APCS)
Amada Marvel 20″ x 25″ Vertical Tilting Band Saw with Programmable Control and Servo Shuttle, VT5063S (Formerly 2125APCS)

Amada Marvel 20″ x 25″ Vertical Tilting Band Saw with Programmable Control and Servo Shuttle, VT5063S (Formerly 2125APCS)

Shipping: Add to Cart to Calculate

Make Offer

SKU: VT5063S (Formely 2125APCS)

Inventory #: 2339

Categories: , ,




Product Description

Amada Marvel 20″ x 25″ Vertical Tilting Band Saw with Programmable Control and Servo Shuttle, VT5063S (Formely 2125APCS)

Inventory # 2339

Model: VT5063S

Made in USA


Table Height: 38″



Rectangles: 20″ x 25″

Rounds: 20″

@ 45°:

Rectangles: 20″ x 17″

Rounds: 17″

@ 60°:

Rectangles: 20″ x 11 1/4″

Rounds: 11 1/4″

Speed Range: 30 – 500 FPM

Feed Force: 0 – 300 lbs.

Blade: 17′ 6″ x 1 1/4″ x .042″

Blade Tension: 45,000 PSI

Vises: 9 1/2″ x 15″, 60° Face Plates

Bar Feed: 48″ Stroke, 60’/ Min.

Hydraulic Oil: 10 Gallons

Cutting Fluid: 2 Gallons

Main Motor: 7.5 HP / 208v, 230v, 460v, 575v / 3ph (Please Specify Desired Voltage at Time of Order)

Standard Features:

Blade Drive: Electric with sensorless vector control for smooth acceleration and full torque

Tilting Column: For miter cutting up to 60° left and right of vertical. Hydraulically powered cam link design with digital angle readout. Angles are set either manually or automatically through the Marvel PC3 controller

3° Canted Column: Standard 3° forward approach angle, for increased efficiency in cutting of structural materials

Feed Force: Direct force sensing electric ball screw feed which combines more consistent feed force with greater control, column travels on re-circulating linear ball ways. Feed pressure can be automatically set when material is selected, or adjusted manually using the PC3 touch screen

Blade: One welded-edge band is furnished with each machine as part of standard part-up supplies

Blade Guides: Rotating easy load combination carbide and ball bearing roller guides with self-tensioning design

Blade Tension: Hydraulically controlled, 45,000 PSI maximum. Machine is equipped with automatic blade break/blade stall shut off switch

Upper Blade Guide Arm: Hydraulically positioned and locking, controlled using the PC3 touch screen

Coolant System: Built-in with flood system, available with drop lubrication system (requires compressed air connection), including chip pan with chip removal ramp

Work-Rest Rollers: Two turned ball bearing rollers, one on the entry side and one on the discharge side of the machine bed

Flushing Hose: Washes away chips from hard-to-get-at places, reducing clean-up time

Automatic Bar Feed: The patente automatic bar feed design features a 48″ stroke length with indexing speeds of up to 60′ a minute and creep speeds of 33″ a minute. The bar feed vise is Servo driven with encoder feedback and combines precision double ball screws with preloaded recirculating linear guides, resulting in positioning accuracy of +/- .005″ per index. The vise itself is hydraulically clamped to prevent material slippage

Marvel PC3 Programmable Control®: Provides programmable logic control unit with a 10″ color, touch screen display. The control features graphical part programming with memory for up to 500 jobs and parts, as well as material selection chart and customizable material library. Both blade speed and feed force are automatically set according to material type for optimal cutting performance. Job programming consists of setting the cut-off length, angle, and number of pieces to be cut. Additional features include inch/metric capability, out-of-stock shut down device, a fast cut job option, and expanded memory storage using removable media. Also includes blade jam protection that senses resistance as the column returns and stops motion to prevent blade damage. Material can also be fed through the machine manually in both directions using the hydraulic shuttle vise. Blade can be stopped with all other power functions operative

Standard Left-to-Right Work Entry: Opposite hand or right-to-left work entry available

Controls: IEC fused disconnect switch and magnetic motor starters with overload and low-voltage protection. Power supply provides low voltage control to all push buttons at operator’s control panel and machine lighting circuits. PLC control and drives mounted in moisture-tight compartment with vibration isolation mountings

Standard Equipment:

10 Gallons of Hydraulic Oil in Machine

2 Gallons of Cutting Fluid Soluble Oil

One Welded-Edge Band Saw Blade

Two Sets Consisting of Parts List

Operating and Maintenance Instructions

Installation Plan, Wiring, Elementary Electric and Hydraulic Diagrams

Electrical and Hydraulic Component List

Contact us for special pricing and availability

FOB Factory

Additional Information

Weight7000 lbs

Can't Find What You Need? Give Us a Call: 1-800-394-4399