norman machine tools header

seacrh used

product image

        
      

Click on image to view the enlarged image


Delta 43-375 Two-Speed Heavy Duty Wood Shaper

Inventory #7009

Model: 43-375

S/n:  88168888

Made in the USA

Specifications:


Spindle:

Diameter(furnished): 1/2" and 3/4" or 1"

Diameters (accessory equipment): 1", 3/4" (extra long), 1/2" (stub)

Capacity (under nut): 1" spindle 4", 3/4"spindle 3 1/4", 3/4" spindle (extra long) 4 3/8", 1/2" spindle 2 1/2"

Travel: 3" 

Speed (forward/reverse): 7,000 AND 10,000 RPM

Motor: 3 hp / 230 V / 1 ph

Mechanical Specifications:


Overall Dimensions: 20" L x 27" W x 37 3/4" H

Table Size: 20" L x 27" W x 34" H

Insert Opening Diameters: 6 3/4", 3 1/2", 3", 1 3/8"

Face Size: 3 3/4" x 12 3/8" x 15/16"

Standard Features:

Unitized Drive Mechanism: The Spindle, housing, motor, raising and lowering mechanism are a single self-contained unit, securely assembled to the under side of the table for absolute 90° spindle-to-table alignment

Rugged Spindle Assembly: Short, rigid drive spindle and closely set lubricated for life ball bearings- pre-loaded to prevent distortion at high speeds- assure accurate chatter-free shaping

Fully Adjustable Fence: Both fence halves this are independently adjustable for precise depth of cut settings using their same convenient control knob and locking lever. Fence halves measure a full 3 3/4" x 12 3/8" and adjust end Wise so that fence opening can be varied in direct relation to the cutter size for safer operation. Entire fence assembly can be easily removed for free hand shaping

Conveniently Grouped Controls: The spindle adjusting hand wheel, spindle lock, height adjustment scale and starting switch are all grouped at the front of the machine within easy reach of the operator from his normal working position

Interchangeable Spindles: 1/2", 3/4", 1" standard spindle, a 1/2" stub spindle for cope cutters and an extra long 3/4" spindle with 4 3/8" capacity under the nut, are readily interchangeable to permit use of a wide variety of shaper cutters. Table opening size can be varied as needed by removing special table insert rings

Magnetic Starter


Excellent Condition

New Replacement Cost: $4,500.00

Special Price: $2,650.00

FOB Our Baltimore, MD Warehouse

rule

rule

Hours of Operation: Monday - Friday 9 a.m. to 5 p.m.
 
1311 South Ponca Street - Baltimore, Maryland 21224
Phone 410-633-2300 or 800-394-4399 - Fax 410-633-7737

Terms and Conditions of Sale